Charge Controller, 30 A, Prostar

Morningstar 30-amp, PWM charge controller for 12-V and 24-V systems

Login to see prices & purchase
SKU: PS-30M Category: Tag:

Description

What this product does: The Morningstar ProStar charge controller is a voltage regulator that keeps your batteries from being over charged by your solar panels. Most “12-volt” panels put out about 16 V to 20 volts, but “12-volt” batteries require 14 V to 14.5 V to become fully charged, so without regulation the batteries will be damaged from overcharging.

Recommended use(s): This charge controller may be used for charging gel, sealed and flooded lead-acid batteries.

Advantages of this product: The ProStar is a small, single module 30-A, 12-V and 24-V, PWM (pulse width modulation) charge controller with four-stage charging (bulk charge, absorption, float and equalize [except gel cell batteries]) and temperature compensation. It has LED status lights to show the charging status, battery status and faults. The built-in LCD digital meter can display battery volts, solar amps and load amps. The ProStar has a built-in low voltage disconnect (LVD) to protect the battery bank from complete discharge.

Disadvantages of this product: At 11.4 V the non-adjustable low voltage disconnect is set too low for good battery health.

Additional notes: Order separately a “RTS” temperature probe for best battery life in hot environments.

Manufacturer’s info: ProStar Data Sheet, ProStar Operator’s Manual, Remote Temperature Sensor Operator’s Manual

Availability: Generally in stock

Specifications

Size (LxWxH) 6.0 in x 4.1 in x 2.2 in (153 mm x 105 mm x 55 mm)
Weight 12 oz (0.34 kg)
Wire Size #6 AWG
Rated Solar Input 30 A
System Voltage 12 V
Maximum Solar Voltage 30 V
Regulation Voltage 14.0 V (Gel), 14.15 (Sealed), 14.4 V (Flooded)
Voltage Accuracy 40 mV
Self-consumption 22 mA
Rated Load Output 30 A
Low Voltage Disconnect 11.4 V
Low Voltage Reconnect 12.6 V
Temperature Compensation -30 mV/°C
Operating Temperature -40 °C to +60 °C

You may also like…