Description

EasySolar & EasySolar-II Inverters

The EasySolar & EasySolar-II are only available as  230 V AC output.

The EasySolar Inverters are described as the “all in one” power solution with sinewave Inverter / charger and AC output distribution.  These can be purchased in 12V or 24V DC.  They include a 100V/50A MPPT charge controller along with the 1600 VA (1300W Continuous). Maximum PV power is 700W for the 12V system or 1400W for the 24V system.   There are two 16A and 10A outputs.   

EasySolar 12/1600.70-16 MPPT 100/50;   VPN CEP121621000, 1600VA, 230V, 12V DC, 
EasySolar 24/1600/40-16 MPPT 100/50;  VPN CEP241621010, 1600VA, 230V, 24V DC

The EasySolars-II can be purchased as  24 or 48 DC Volts.     These models include the MultiPlus-II Inverter/Charger, a Solar MPPT-Tr charge controller and a GX device. The EasySolar-II can be purchased in either 3000 (2400W  continuous) or 5000 VA (4000W Continuous) AC output power.  There are two 3000VA models to choose from, each includes a MPPT 250V/70-Tr (70 Amp) charge controller, the max PV power varies with each model.  The 5000VA model incudes a MPPT 250V/100-Tr (100 Amp) charge controller, the max PV power is 5800Watts.  

EasySolar-II 24/3000/70-32 MPPT 250/70 GX; VPN PMP242307010, 3000VA, 230V, 24V DC
EasySolar-II 48/3000/70-32 MPPT 250/70 GX;  VPN PMP482307010, 3000VA, 230V, 48V DC
EasySolar-II 48/5000/70-50 MPPT 250/100 GX;  VPN PMP482507010; 5000VA, 230V, 48V DC

EasyPlus Inverters

The EasyPlus Inverter is similar except that it does not include a PV charge controller.  It is only offered as a 12 Volt DC 1600 VA (1300W Continuous) sinewave inverter with a peak power of 3000 Watts.

This Inverter includes the battery cables and overcurrent protection for output loads.  The EasyPlus does not come with an outlet receptacle or power cord, it will require that your hard wire both the inverter input through a circuit breaker and outputs to a power strip or distribution panel  for multiple loads.  Please read the specific Inverters Installation manual to correctly size the circuit breaker for each inverter.

EasyPlus C 12/1600/70-16; VPN CEP121620000, 1600VA, 230V, 12V DC

Because of the vast selection available, it would be best to consult with our team to determine the best model for your application.  When selecting the EasySolar or EasyPlus, you will need to determine your battery chemistry (AGM or LFP); battery bank voltage (12, 24 or 48 Volt); Input grid power (230/50Hz) and if remote monitoring is desired.  The outputs of these inverters can either feed a single phase distribution panel or be hard wired to a power strip.  

Victron has a lot of dealers worldwide, you may be able to purchase Victron equipment locally. If not, contact us and we can purchase it for you and ship almost anywhere in the world.

Our team in North Carolina has experience with Victron equipment and can help you get it all hooked up and configured correctly. Email us at power_systems@sil.org if you’d like setup help, a price quote, or if you just need help deciphering all the model numbers and choosing the right model.